What are spring hangers for semi trucks?
Semi-Truck and Trailer Leaf Spring Hangers Leaf spring hangers on heavy-duty trucks and trailers play a critical role in the function of the suspension systems. The leaf spring hangers act as frame attachment points for the leaf springs and leaf spring shackles on heavy-duty trucks.
How are trailer spring hangers measured?
Measure the width of the spring. The majority of trailer springs for boat, motorcycle, horse, camping, flatbed, and utility trailers range from 1-3/4 to 2 inches wide. To determine the width, measure across the top of the top leaf. Measure the length of the spring.
Where do spring hangers go on a trailer?
Once you have the spacing figured out you need to place the two hangers so that proper tongue weight is achieved. A general rule of thumb is that 60 percent of the total trailer weight should be forward of the center line of the axle or axles on the trailer.
How long do semi truck leaf springs last?
On average a set of leaf springs for a standard pickup truck or van will have a lifespan of about 200,000 miles.
What are leaf spring hangers for?
Hangers are the support to the leaf spring, whereas the shackles keep the tires in contact with the track in a bumpy ride. These shackles and hanger are the key parts in any suspension system and they allow the leaf spring to function properly.
How do you calculate leaf spring capacity?
The best way to determine the weight capacity of your leaf springs would be to check the weight rating of the axle on your trailer. The trailer will have a plate or sticker on it that will list the VIN number. The weight rating of the axle should be listed on that same plate or sticker.
How can I make my leaf spring truck better?
The following steps can make a huge difference:
- Reduce the unsprung mass.
- Soften the suspension system.
- Change the wheels and tires.
- Modify the chassis.
- Eliminate the vibrations.
- Get new leaf springs.
What is the difference between leaf springs and coil springs?
Coil spring is made by winding a constant diameter wire in the form of helix. Leaf spring is made by clamping a series of flat plates of varying length one above another. Although the coil is wound in helical path, basic shape of helical spring is cylindrical (hollow). Basic shape of leaf spring is semi-elliptic.
How tight should trailer shackles be?
There is no specific torque rating for shackle bolts. Basically for the middle bolt there should be enough free play in the shackles to allow them to move. The best thing to do when tightening down shackle bolts is to use lock nuts and tighten them until they are snug and then backed off 1/4 turn.
Are trailer leaf springs directional?
Normally the band is placed forward of the axle on the trailer but it really does not matter which way the band is oriented. Measure the distance from the center of the spring eye on one end of the spring to the center of the spring and then to the center of the back spring eye.
Where can I buy spring hangers for my trailer?
TruckSpring.com carries spring hangers for double-eye leaf springs, and slipper style leaf springs to fit most light to medium duty trailers. The average customer rating for Spring Hangers: 5 out of 5.
Are there replacement leaf spring hangers for trucks?
Replacement leaf spring hangers for heavy duty trucks and trailers are designed specifically for your make, model and year of your truck. High quality direct OEM replacement suspension parts.
Are your spring hangers causing suspension problems?
Carrying heavy loads over long distances takes its toll on the entire suspension system, but the spring hangers can often be overlooked until they fail or have so much wear that they are causing problems.
Are U-bolts and springs included in the hanger kits?
Note: U-Bolts and spring are not included in hanger kits. Redline Triple Axle Trailer Hanger Kit APTT6SE is designed for use with 2 inch wide Slipper Springs. Details Typically ships in 3 to 4 business days.