What does semi recessed basin mean?

What does semi recessed basin mean?

A semi recessed basin is one that fits very neatly and stylishly into a bathroom work top or vanity unit. The basin has been designed so the front of the sink is left to hang slightly over the counter of the worktop or vanity unit.

What is a semi Basin?

So what is a semi-recessed basin? A semi-recessed wash basin straddles the line between a wall mounted basin, and a counter mounted one. In essence, half of the basin overhangs the edge of the counter, while the other half sits back into it.

Can you cut Isocast?

The basin and integrated worktop should be xed to the unit(s) and sealed in place using a silicone sealant (not supplied). The isocast basin is designed to t units of the same size and as such does not need to be cut down.

How do you cut a semi recessed basin worktop?

On both sides of semi-recessed basin worktop, measure from the front of the worktop, 26mm. Mark it and then draw an angled line to the back of the worktop. Check that cutting at this angle gives enough worktop coverage under the basin, we recommend 20mm.

How do you measure a semi recessed basin?

Here’s how to measure for a basin

  1. Start with the width. Measure the distance from one side of the basin to the other.
  2. Next, measure the length. This is the distance from the rear of the basin to the front.
  3. Then, on the exterior of the basin, measure from the top to the bottom.
  4. Finally, measure the depth.

What is a recessed bowl?

A recessed basin is a bathroom or kitchen wash basin that mounts flush with a solid work surface. A recessed basin is a bathroom or kitchen wash basin that mounts flush with a solid work surface, thereby leaving very little of the basin protruding above the countertop.

How does a Sinkless sink work?

A full EIGHT versions of the sink were tested before they finally found the perfect one. Here’s how it works: the surface slightly slopes down so that all the water runs into the tiny slit you see in the video. Kim says that their faucet has really high pressure, and there’s never any spillage because of the design.

How do you clean Isocast sinks?

The isocast basin is made of a non-porous material and as such it can be wiped clean with a damp cloth or sponge using mild detergents or soapy water. DO NOT use abrasive cleaning solutions. Where possible avoid sliding hard or sharp objects on the surface to prevent scratches.