What is blending solvent?
Description. Powercan Blending Solvent is a specially formulated solvent to assist in dissolving the dry edges of freshly sprayed 2K clear coat. Powercan Blending Solvent gives a soft edge to the repair enabling the work efficiency to be increased by limiting the size/scale of the job to a single panel.
What is spot blender used for?
1K Spot Blender is a special product for homogenous paint transitions in the blending area of 2K clearcoats as well as of single stage topcoats with outstanding blending results. The Spot Blender is used immediately after the clear- / topcoat is applied.
What is uniform finish blender?
Uniform Finish Blender is used to remove dry spray edges on spot/panel repair blends and for extending blends after a repair. When doing an OEM warranty repair, refer to the Manufacturer’s blending recommendations. A Universal Ancillary Brand.
Can you blend clear coat?
You need to blend into the sail panel, otherwise you have to clear the entire roof and the opposite quarter panel. The trick is to soften up the factory clear enough to actually melt the two together. I do this by using slow reducer. on wet coat of final clear up to the next orange line and finish off with reducer.
What is blending thinner?
Blend thinner is a special product for homogenous paint transitions in the blending area of 1K/2K clear coats as well as of 2K topcoats with outstanding blending results. The blender thinner is used immediately after the clear-/ topcoat is applied.
How do you spray a spot blender?
How to use the SprayMax 1K Aerosol Spot Blender?
- Sand the transition surface in advance with a sanding paper.
- Apply the spot blender right after the use of topcoat or clearcoat in the required zone.
- Apply 2-3 light sprays until you obtain an equal transition.
- This blender requires no flash-off time.
Can you blend 1K clear coat?
Blender clear is a special product for homogenous paint transitions in the blending area of 1K / 2K clear coats as well as of 2K topcoats with very good blending results. The blender clear is used immediately after the clear- / topcoat is applied.
What is fade out thinner?
Description. Fade Out Thinner 400ml is a high quality solvent for dissolving old paint layers and poor paint patch works. This acts as a “softening” agent which reaches into the old paint layer. Fade Out Thinner is often used for spot repairs and touch-ups.
How do you blend single stage urethane?
For blending we usually sand the repair area with 600 and the blend area (and beyond) with 1200 or 1500. We apply the color over the repair until we achieve coverage then over-reduce the color, extend (blend) the area, then empty the cup and pour in a little SLOW reducer and dust it on the blended edge.
How do you do a fade out solvent?
Polish the entire area to remove all imperfection & machine sand around the blend area with P2000-3000. Degrease throughly with a Low VOC surface cleaner. After pretreatment do not touch with bare hands. Mask entire vehicle to eliminate unwanted overspray.
Can I blend clear coat?