What is H2S Awareness specific program?
This safety awareness program is intended to provide information to Winger Companies, herein referred to as Winger, employees regarding the potential health effects of Hydrogen Sulfide (H2S).
What is the OSHA standard for H2S?
Exposures must not exceed 20 parts per million (ppm) (ceiling) with the following exception: if no other measurable exposure occurs during the 8-hour work shift, exposures may exceed 20 ppm, but not more than 50 ppm (peak), for a single time period up to 10 minutes.
What is H2S safety Training?
This H2S training will teach the student how to properly prepare for, identify, and react to Hydrogen Sulfide Exposure. The course includes information on H2S physical and chemical properties, as well as common sources, controls, and best practices. It has been developed in accordance with OSHA CFR 1910.1000.
How do you handle hydrogen sulfide safety?
For exposures below 100 ppm, use an air-purifying respirator with specialized canisters/cartridges for hydrogen sulfide. A full face respirator will provide eye protection….Control Exposures
- Use exhaust and ventilation systems to reduce hydrogen sulfide levels.
- Train and educate workers about hazards and controls.
What is the auto ignition temperature of hydrogen sulfide?
500 deg F (260 deg C)
How many ppm is 1 H2S?
Percent to ppm conversion table
Percent VOL | ppm |
---|---|
0.001% | 10 ppm |
0.01% | 100 ppm |
0.1% | 1000 ppm |
1% | 10000 ppm |
What ppm does H2S stop smelling?
Health Hazards
Concentration (ppm) | Symptoms/Effects |
---|---|
0.00011-0.00033 | Typical background concentrations |
0.01-1.5 | Odor threshold (when rotten egg smell is first noticeable to some). Odor becomes more offensive at 3-5 ppm. Above 30 ppm, odor described as sweet or sickeningly sweet. |
Is H2S training required by OSHA?
OSHA and ANSI both recommend all workers in areas where there is a high potential for unsafe levels of Hydrogen Sulfide (H2S) gas receive initial training on H2S hazard identification and control methods.
How long is H2S certification good for?
three years
Upon successful completion of all required components of H2S training, you will earn an H2S Alive temporary training certificate. Your permanent card will be mailed to you by ENFORM in 4-6 weeks. This permanent ticket will be valid for three years.
What PPM does H2S stop smelling?
At what ppm do you stop smelling H2S?
► ODOR THRESHOLD = 0.008 to 0.1 ppm (The odor of Hydrogen Sulfide can NOT be detected above 100 ppm.) determine potentially hazardous exposures. Substance List because it is cited by OSHA, ACGIH, DOT, NIOSH, DEP, IRIS, NFPA and EPA.
How do you make H2S gas at home?
One part of sulphur and two parts of paraffin wax are mixed & heated above 160° C. Hydrogen sulphide is formed during the reaction. The rate of reaction is proportional to temperature. The reaction is fast and accurate.
What is H2S safety program?
Hydrogen Sulfide (H2S) Safety Program Background: Hydrogen sulfide presents a potential hazard to workers at the work site. It usually occurs as an unwanted by-product and can result in worker exposure in many different industries or occupations.
What courses do I need to be certified to work with H2S?
Courses such as “H2S Alive” and First Aid are recommended when workers may be exposed to hydrogen sulfide at the work site.
What are the first aid measures for exposure to H2S?
The following first aid measures should be followed for exposure to H2S: First Aid First, immediately remove the victim from further exposure. Designated rescuers must wear properly fitting, positive pressure self-contained breathing apparatus other required safety equipment appropriate to the work site.
What should the H2S alarm be set at?
All fixed H2S detection/alarm systems should: Be set to activate at 10 ppm for a low alarm and at a maximum of 100 ppm for a high alarm. Have a distinctive visible and audible alarm consistent throughout the facility. Activate alarms both in the field and in the applicable control room.