What is UID indicator in iLO?
the main idea behind this UID indicator is to help you to physically identify a server in your computerroom (in a rack or in your datacentre even). When you logon to the iLO remote management port of the Proliant server, this UID will blink on/off i.e.
How do I turn off HP iLO UID light?
In the ILO Interface if you look in the bottom right hand corner of the screen you will see beside the power indicator a button that is the UID indicator that you can click to tuen it on and off.
What is the UID button?
The UID is a unit identifier button for easy system location in large stack configurations. When the UID button is pressed, the blue LED on both the front and rear of the chassis will be illuminated.
How do I know if iLO is enabled?
Re: How to know iLO features enabled in my HP servers / By default all iLOs are enabled using DHCP, if you plug them into a network with a DHCP server they will get an address. To see what IP is assigned, either watch during POST when the iLO firmware displays, or use the HPONCFG utility from the host OS.
How do I reset my iLO?
This is the easiest method.
- Open the iLO web interface.
- Enter iLO login-name and Password.
- Click Diagnostics from the left menu.
- Click the Reset button.
- Click OK button in response to “Are you sure you want to reset iLO 2” message.
- It may take 30-60 seconds for the iLO to reboot.
What is HPE UID?
The UID LED is used to locate a particular server when it is deployed in a dense rack with other equipment. Activating the UID LED helps an onsite technician to quickly identify a server for maintenance tasks.
How do I change my IP address on iLO?
From the iLO RBSU screen, select network→DNS/DHCP, and then press Enter….Configuring a static IP address (iLO RBSU)
- To set DHCP Enable to OFF, press the spacebar, and then press F10 to save the changes.
- Select DHCP Enable.
- To set DHCP Enable to OFF, press the spacebar, and then press F10 to save the changes.
What happens if we reset iLO?
iLO resets and all active connections are ended. If user is managing iLO remotely, the remote console session is automatically ended. When user resets the iLO, the iLO 5 configuration utility is not available again until the next server reboot.
How do I turn the UID led on/off in ILO?
Log in to the iLO web interface. To turn on the UID LED, click the UID icon . This action illuminates both the front and rear UID LEDs blue. To turn off the UID LED, click the UID icon again. The iLO control icons are available from any iLO page.
What does the UID light mean on a device?
The UID light blinks automatically to indicate that a critical operation is underway, such as Remote Console access for server hardware or a firmware update. Do not remove power from a device when its UID light is blinking. Prerequisites Minimum required privileges: Infrastructure administratoror Server administrator
What is the Integrated Lights Out (iLO) interface?
The remote access console provides the Integrated Lights Out (iLO) interface, a method to regain system access when the OS is down or having connectivity issues. It is advisable to test the iLO on a regular basis, to ensure system access (in non-hardware related system down situations) when it is needed.
What are the virtual indicators in ILO?
The below is taken from the help section in the iLO GUI, this should clarify it for you. The Virtual Indicators allow you to monitor, and in some cases control, the state of indicators on the host system, including the Unit Identification Light (UID). The UID helps you identify and locate a system, especially in high-density rack environments.
https://www.youtube.com/watch?v=VwVQbLSzJY4