Where is the radiator drain plug located on a Jeep?
Put on your safety glasses and crawl under the Jeep on a creeper to locate the radiator drain plug. On a 4.0 liter engine, it will be on the right (passenger side) side of the inside of the radiator and on a 4.7 liter engine, it will be on the left (driver’s side) side of the inside of the radiator.
Where is the radiator drain plug?
Hello, the radiator drain plug will be a the bottom edge of the radiator, facing the engine (passenger side). If you drain the coolant, be sure to catch it with a pan of some sort, and properly dispose of it.
How many quarts of antifreeze does a 2003 Jeep Liberty take?
Fluid Capacities and Type
| Capacity (Quarts) | Capacity (Liters) | |
|---|---|---|
| Cooling System (3.7L) | 14.00 QUARTS | 13.00 LITERS |
| Cooling System (2.4L) | 10.10 QUARTS | 9.55 LITERS |
| Cooling System (2.5L Diesel) | 13.20 QUARTS | 12.50 LITERS |
| Cooling System (2.8L Diesel) | 13.20 QUARTS | 12.50 LITERS |
How do you drain the radiator on a Jeep Cherokee?
Easiest way to drain coolant is remove the air filter box, then remove the bottom rad hose from the water pump. X2. That will drain out most of it. Just make sure not to get too much water into the water pump.
How do you drain the radiator on a 2004 Jeep Grand Cherokee?
Open the radiator’s cap on top of the radiator, under the hood. Locate the radiator’s drain plug under the radiator. It’s located on the bottom of the radiator on the passenger’s side. Place the large container underneath it to collect the old coolant, and loosen it by twisting it counterclockwise.
How do you unclog a radiator drain plug?
To do this, disconnect both upper and lower hose from the rad. Plug the lower outlet and fill with water. Once it’s full, pull the plug and see if the water gushes or trickles out. If the rad is flowing slow and isn’t leaking, you can pull it and have it pressure flushed and pressure tested.
How do you open a radiator drain valve?
Grab the body of the valve with your grips and loosen the nut with your adjustable spanner. With both valves now open, you can completely loosen the nuts and lift your radiator to one side to let the remaining water drain out. If all went well you should have successfully drained your radiator!
What kind of coolant does a 2003 Jeep Liberty take?
Zerex 1 Gallon Orange 50/50 Coolant/Antifreeze.
How do you flush a jeep cooling system?
Remove the bottom radiator hose from the water pump (very easy if the plastic air filter box is removed 1st). Stick a garden hose in the heater hose and flush. Stick the garden hose on the heater hose nipple on the thermostat cover and flush. Stick garden hose in the top radiator hose and flush.
What antifreeze does a 2003 Jeep Liberty use?
Zerex 1 Gallon Yellow 50/50 Coolant/Antifreeze.
What kind of antifreeze does a 2003 Jeep Liberty take?
Notes: Dex-Cool 50/50, Premixed Do Not add water.