How much do live edge oak slabs cost?
Unfinished live edge wood slabs average about $20 per board foot, for example, which is a wholesale price by current market standards.
Why are live edge wood slabs so expensive?
Live edge products are more expensive than regular cuts of wood because they are so unique and labor-intensive. They cannot be made in bulk since each slab is cut at the same length as the log. Every live edge piece is distinctive, blending aesthetic with practicality.
How much does a slab of oak cost?
The table below has the cost for rough cut slabs only….White Oak Slab Cost Sheet.
Slab Width | White Oak Slab Cost |
---|---|
20″ or Less | $6/bd ft |
20″-29″ Wide | $8/bd ft |
30″-34″ Wide | $12/bd ft |
35″-39″ Wide | $14/bd ft |
How thick are live edge slabs?
Most dining or conference tables we make land somewhere between 1.75” and 2.25” finished. This is typically easy to accomplish with well dried slabs with “minimal” drying movement that for us start at 2 3/8” thick if under 24” wide or 2 7/8” thick if 24”-36” wide.
How do you calculate board feet in a slab?
The basic calculation for board feet is:
- Thickness x Width x Length / 12 = Board Feet.
- 2 x 4 x 10 / 12 = 6.667 Board Feet.
- A 2 x 10 -16′ has 26.67 board feet:
- 2 x 10 x 16 / 12 = 26.667 Board Feet.
- PCS x T x W x L / 12 = Board Feet.
- 84 x 2 x 8 x 12 / 12 = 1,344 Board Feet.
- 1.25 x 6 x 14 / 12 = 8.75 Board Foot.
Do live edge tables warp?
The thinner the wood is milled means the greater the likelihood that your live edge table will be prone to warping and twisting. A reputable sawmill should be milling live edge slabs no less than three inches in thickness in order to account for the expected changes that occur in the wood during the drying process.
How thick should live edge slabs be?
at 1.5” minimum for smaller pieces and ideally 1.75 or more for wide pieces. Most dining or conference tables we make land somewhere between 1.75” and 2.25” finished.
What is the difference between Live Oak and White Oak?
No, live oak and white oak are not the same. White oaks are largely tall and thin, live oaks are the massive, low-branched, spreading crown oaks more prominent in the deep south. Quercus alba is the ‘classic’ white Oak, but there are many other species that are classed as white oaks.
Does Live Oak make good furniture?
Of all the different oak species, live oaks are really considered to not be very good for furnituremaking. That’s not to say that it can’t be done, but you will find it extremely difficult to get good results when air drying live oak.
How do you keep bark on live edge wood?
Pour over epoxy resin is your best bet to hold the bark in place if you plan on keeping it. Polyurethane would be another option, but won’t be quite as strong. Oils and waxes seal the wood, but they aren’t going to serve as an adhesive like epoxy would to keep the bark in place.