Should you use reverb or delay on vocals?
Vocal delay is more common with faster songs and more energetic genres. Having the reverb “wash” would be too much for these songs. It would bleed over the words and push the vocals too far back. These aggressive songs usually want the vocals up-front and close so that the listener really feels the energy.
Should you use delay on vocals?
One way to add rhythmic enhancement to a vocal performance while adding depth and space is by using repeating delays. Depending on the pace of the vocal performance and the tempo of the song, delay times will usually range from sixteenth notes all the way through to half or whole notes.
How do I adjust the delay and reverb on my vocals?
Move the pre-delay to about 30-40% or so as a starting point and see how it sounds. With your EQ, maybe set the high-pass around 200Hz and the low-pass at about 12kHz. In a situation like this, you may want to have more body in the reverb. The following example shows a dual-reverb setup.
Can you use delay as reverb?
A basic delay will not sound like a reverb even when set to a very short delay with multiple repeats. A good delay may allow mixing of reverb effect, but normally they are two separate effects that you can add in your effects loop.
Do I need both delay and reverb?
If you are looking to replicate some classical sounds, like those in the 60s or 70s, use delay first, followed by reverb. You can do this either through the software you are using or by grabbing some great stompboxes.
Is delay better than reverb?
Use a Delay if the mix sounds Muddy If you start adding reverb to most elements in the mix, you might notice that suddenly the guitar fades into the background, some other instruments don’t cut well through the mix, and everything gets muddy. Try using delay instead on some of those tracks and hear your mix clean up.
How do you get perfect reverb for vocals?
5 Vocal Reverb Tips That Will Level Up Your Mixes!
- Send an Effected Vocal Signal to a Reverb. The first idea is to use something other than the dry leads to send into your vocal reverb.
- The Abbey Road Trick.
- Try 2 Different Mono Reverbs.
- Match the Vocal’s Space to the Instrumental.
- Use Reverse Reverb as a Transition.
What is the best type of reverb for vocals?
Room Reverb They’re also the easiest to fit inconspicuously into a mix. Room reverbs are appropriate for vocals, guitars, pianos, drums — just about everything. When used in moderation, these reverbs can add space to a source while maintaining an intimate, in-person character.
What is the best reverb setting for vocals?
For vocal reverb, you can even come down to around 7 kHz, or even lower if you’d like. Taking it a step further, you can take out some of the mid-range aggression. If we go around 2 kHz in the middle and dip it a little bit, it will get even sweeter. It’s a really simple, nice trick!
What is the difference between reverb echo and delay?
Here is where reverb and delay are related. Stand in a huge room and yell “hello.” The very first sound you hear reflected off the walls is an echo. That echo quickly turns into reverb as the sound is reflected off a second, third, and fourth surface. Think of delay as a single copy of the sound at a later time.
Should reverb be before or after delay?
In a guitar signal chain, the delay unit is generally placed before a reverb pedal, but it’s up to the individual musician to decide on the order. Putting delay before reverb can muddy up the sound, so most guitarists prefer placing it after the delay.
What’s the difference between delay and echo?
Delays are separate copies of an original signal that reoccur within milliseconds of each other. Echoes are sounds that are delayed far enough in time so that you hear each as a distinct copy of the original sound.
Do you need a delay or reverb for vocals?
Both of these are useful for vocals, but which you choose is very important. Since vocals are usually the most important instrument in the song, the reverb or delay you choose will be more obvious than on other instruments. Because of that, there’s a balance that has to be found with your vocal space.
Why use delay and reverb when mixing?
Professionals who have been mixing for a long time have learned how to really dial in effects like reverb and delay so that they create a pleasing effect without being overbearing or stepping on any other part of the mix.
How to process wet reverb without affecting the vocals?
This way, you are able to process just the “wet” reverb without affecting the EQ of the vocals. Pop an EQ after the reverb on the return track and start listening to how it’s blending with the vocals and mix. (Hint: It’s easier to hear these buildups when the send is set very high to hear the reverb more.)
How can I make my vocals sound better without delay?
Apply some EQ and compression to your vocal to make it sound more transparent and polished. After you’re happy with the results, you may add some plate or room reverb with reasonable pre-delay time and some quarter or eighth note delay, which you’d have to blend moderately.