Category: Interesting

Thesis is important not only to perform well, but also adequately protect at a meeting of the State Examination Commission. With a bad, crumpled and uncertain report, the impression of even a good job is blurred, and this results in a low rating. Everything is explained simply: for those 10-15 minutes that are given to a graduate student to defend a graduation project or work, it is extremely difficult for members of the attestation commission to create a clear opinion about the level of student training. Therefore, the question of how to write a report for a thesis, an example of which can be taken for review, should be among the priorities in preparing for the defense.

Report structure

How to write a report to the thesis? An example will help to understand. The optimal duration of the report should not exceed 10 minutes, but it would be good to keep up with 8. The sequence of the message depends on the presentation of the graduation project / work, but usually includes:

1. Introduction (topic, purpose, structure of work).
2. The volume and content of the main parts.
3. Detailed description of sections.
4. Positive aspects of the work, where they can be implemented in practice.
5. The presence of external positive conclusions about the results.
6. The main findings and directions for further research.

One of the major shortcomings in the protection is the isolation of the report from the visual-graphic materials presented to the members of the attestation commission. In such cases, they have a well-founded impression of the work being fragmented, the lack of integrity and logic of presentation. Another common mistake of graduate students is that some sections of the project are not sufficiently covered during the report. This may create the impression that the graduate student does not know these particular parts of his own project.

In such cases, it is recommended to highlight particularly obscure aspects of the work, and those sections that the graduate student is familiar with, intentionally skip, provoking questions from members of the attestation commission. Naturally, the answers to them will be the most detailed and deep. This will have a positive impact on the final assessment.

How can you overcome these difficulties

Consultation, how to write a report to the thesis, an example of which is offered at the department, is one of the priority activities of our authors. All of them are experienced specialists in this field of knowledge, and also possess tremendous experience in preparing and presenting the results of thesis design. Therefore, if a graduate student experiences problems with preparing work for the defense, he will always be able to receive qualified and timely assistance.

This requires:

• Check with the head of the thesis, in what form it is necessary to represent it during the defense. This may be, in particular, the presentation (most modern) form or stands with posters on the subject of the main sections.
• Provide the author with all materials related to the preparation of the thesis: pre-thesis practice data, baseline data issued by the graduating department, expected outcomes, etc. The quality of the report and protection as a whole depends on the completeness of the initial data on the future project.
• Coordinate the final form of the conclusions of the thesis work.

If such information is transmitted to the author in a timely manner, and it takes into account all the wishes of the head of the thesis, then successful protection is guaranteed. Indeed, during the preparation of a report on protection, consultations can be regularly held on the preparation of a thesis for protection and on the agreement of individual places of the report with the presentation materials provided.

An important part of the thesis is a list of references. The sources indicated in it make it possible to assess how deeply the topic was developed, how much relevant information was used, whether the latest developments were studied. Registration of the list of references for the dissertation is strictly regulated.

How to make a list of used literature for the dissertation

Definition 1

Thesis is the most extensive and serious research prepared by a student during his studies.

In this regard, the requirements for the list of references for the dissertation more stringent than for other types of work.

Example 1

For example, in the abstract it is usually enough to specify 5-10 sources used, in term paper – about 20 sources, while in the dissertation, at least 40 sources are usually required (and in the humanitarian disciplines the number can be even greater).

Basic requirements for sources of literature in the dissertation:

Sources should have a different character. It is necessary to use both books (monographs, collections, textbooks and manuals), and articles from periodicals, and electronic sources, and legal acts.

Sources must be existing. Do not invent the author or “correct” the year of publication, publishing house and other parameters. The manager may wish to familiarize himself with the source, and an awkward situation will arise.

Sources should be really used. This is expressed in the presence of references to them in the text of the work.

Example 2

It is impossible to rewrite an entire chapter from one textbook, and include 20 unused, and just seen in the library, list of references.

Sources must be relevant. As a rule, a requirement is established not to use books older than 5 years, articles older than 3 years (books of the 2015-2019 year of publication and articles of the 2017-2019 year of publication may be included in the list of literature of the dissertation in the 2019 academic year). If we are talking about a review of the development of the phenomenon or about the works of the classics, it is permissible to use older editions (especially if there were no reprints). In any case, “fresh” sources should also be listed.

Remark 1

For legal acts, there is no clear time limit in years – the edition must be valid (except for the case of analyzing historical documents).

Grouping and sorting sources in the list of references

There are several approaches to grouping and sorting sources in the bibliography:

All sources may be listed in the order mentioned in the text, regardless of their type.

Example 3

If on the third page of the work there is a link to a monograph, on the fourth to the site, and on the fifth to the law, then in that order they will be listed in the list of references.

Only the first reference to the source is taken into account; when reused, it is not duplicated in the list. The exceptions are different parts of the same composite document (two different articles from the same journal) – each element of this kind is considered separately.

Sources are sorted alphabetically. This can be grouped by type of sources (common grouping scheme: regulations, then books, periodicals after them and electronic resources last). A mixed scheme can be applied: the regulations are placed at the top of the list, and then all other sources are alphabetically distributed without category. At the same time, the normative acts themselves can be grouped by legal force, alphabetically or by date of adoption.

A specific method of sorting and grouping is established at the university and is prescribed in the guidelines for graduation design.

How to make sources in the list of references in the dissertation

This standard defines how bibliographic descriptions of documents and their parts are compiled. Bibliographic references, which are made in the text of the dissertation, are made out a little differently – the indicated refers to the list of references. A university may impose simplified requirements on how the list of references should look like – some fields of bibliographic description in this case are omitted.

The easiest to describe is a bibliographic description of a book with one author. The main specified details of the publication:

• Author (surname and initials).
• The name of the book (the title is written in full).
• Type (text).
• View (monograph, textbook, study guide, etc.).
• City of publication, publisher name, year of release.
• Number of pages.

Example 4

Example description:

Silvan, A. Criminal law in historical context [Text]: monograph / A. Silvan. – M.: PSC RAS, 2017. – 128 p. – ISBN 3-228-13852-0.

If there are several authors, then only one is indicated at the beginning, all the rest are indicated only in the second block of authors:

Example 5

Bashmack, D. The concept of marketing development [Text] / D. Bashmack, A. Peterson. – M.: Young Guard, 2016. – 390 p. – ISBN 5-287-39841-1.

The bibliographic description of a part of a document is drawn up as follows:

Information about the part of the document // Information about the document as a whole. – Information on where the component is in the document.

Example 6

An example of an article on this scheme:

Zim, A. Management as a basis for the development of a market economy [Text] / A. Zim // Management and Modernity. – 2018. – №4. – pp. 17-35.

Example 7

Example of the description of the material posted on the site:

Ministry news [Electronic resource] // Ministry of Education. – Access mode: https://edu.gov/press/, free. – Title from the screen.

Registration of references in a text editor

References are printed in the same font as the main text of the work (usually Times New Roman, 14 pt., line spacing is one and a half).

A handy tool for decorating the list of references – a numbered list.

Using a numbered list will allow shifting to the text editor control over the correct numbering, which is important when adding or deleting sources. If numbering is done manually, duplicate numbers or missing items may appear in the list.

An additional advantage when using a numbered list is the ability to correctly execute a link to the source. When making links in square brackets, you should not enter the source number on your own, but cross-reference it. This will keep the links between the source and the link to it, even if the source number in the list is changed, instead of thorough checking it will be enough just to update the fields with one click.

How does the dissertation usually go? The student comes with his papers, worries, starts to read his report in a monotonous and quiet manner (so that his knees tremble for fear and do not want to irritate the commission). At this time, teachers sit, drink mineral water, continually discuss their immediate problems and, in general, do not particularly delve into the report. Then comes the time for questions. But since nobody listened to monotonous mumbling, the questions usually concern the general curriculum, not the dissertation itself. As a rule, the student is not ready for this.

I will not teach you how to be brilliant speakers and keep the public for many hours, but based on my experience, I can give some advice on how to make the commission listen to you.

1. Look

As a rule, answering to the public, we are afraid to look into the eyes. Therefore, the look usually rushes over the heads, which is completely wrong. Commission members relax and treat the student like a radio: you can listen, but you cannot. But when the speaker calmly looks into his eyes, it makes you strain and start working. In addition, the student can catch a glimpse of the reaction to the words and adjust, if necessary, his speech.

2. Intonation

Monotonous speech puts the listener to sleep. Therefore, try to intonate the voice. Speak something louder, then quieter. Somewhere faster, and somewhere slower. Be sure to highlight important points and do not focus the attention of the commission on minor ones. Do not bother – then you get the impression that you are confident in your work …

3. Gestures

It is important to accompany your speech with gestures. The statue will not be able to hold attention for a long time. However, you should not swing your arms in all directions, dilute your speech with smooth and slow gestures. It is best to rehearse speech at home in front of a mirror.

4. Sincerity

At the end of the speech, you can express the deepest regret that you could not cover all the questions on this topic. You can also say that in the thesis you will cover the topic in more detail and take into account all the shortcomings and shortcomings indicated in the dissertation review (most likely they themselves will stop you and put an extra “plus” to your presentation). These are just some tips that will help to confidently keep on defense, but, besides how to talk, you need to know what to say. If, after the work done on the dissertation, there is no more time and energy left to write a speech, it is quite inexpensive to order it from us on the website. The author, who you choose, will analyze your dissertation and write the appropriate speech. Of course, if you do not like it, we will either send it for revision within 20 days, or refund your money. If you decide to write a speech yourself, then the information on how to do it, read the article “Speech for the protection of the dissertation”.

The dissertation (especially its theoretical part) is based on the study of various sources. The use of other people’s thoughts and data collected by other authors is accompanied by a link to the publication. For this are footnotes.

What are the footnotes in the thesis

Before describing how to make notes in a dissertation, you need to decide on the terminology.

Definition 1

The word “footnote” means the text that is placed at the bottom of the page after the feature that separates it.

The footnote may contain text of different content – notes and explanations of the author, translation of foreign words used by the characters, etc. In the thesis work, such objects are not provided, but bibliographic references are necessary.

Definition 2

Bibliographic references are an element of the document’s help.

Bibliographic references indicate information (of a bibliographic nature) about the document referred to, considered or cited (in whole or in part), which is sufficient to find and identify it.

Bibliographic references are of different types. The composition of the elements is distinguished:

• Full bibliographic link. Such a link makes it possible to identify, search for a document, as well as to give its general characteristic.
• A brief bibliographic link, focused only on the search document. It is made on the basis of the principle of laconicism.

According to the location of the links are:

• Placed inside the text of the document – inline.
• Placed in a footnote (bottom of the page) – subscript.
• Rendered for the text (in the balloon) – endnote.

In order of mention links are:

• Primary (when the source is mentioned for the first time).
• Repeated (the above information can be specified in abbreviated form).

Bibliographic references (footnotes)

An example of bibliographic references in the final qualifying work is most often given in the training manual. It is usually recommended to use either inline links (in square brackets after the quotation), or subscripts.

To make footnotes in the thesis work is somewhat more complicated than inline links.

Example 1

Compare the examples: [5, c. 30] and 2 Talkien V. Logistics in the service sector: studies. for universities. – M .: Transport, 2018. – p. 30.

In the first case, just the source number is indicated, and after the comma the page number is difficult to make a mistake, in the second case there are quite a lot of details of the document, and the design differs from the design in the list of sources used (it will not work just to copy).

Standard 7.0.5 contains a list of elements included in the subscript bibliographic reference. In this case, you can omit some of them, so as not to overload the text with too voluminous footnotes.

How to make notes by standards

Standards regulate how to put footnotes. The standard is devoted to questions about what to write in a footnote (which elements to include in it, which separators to use between elements, etc.). Issues of formatting (technical design) attention is not paid. Not even the font of the footnotes is specified. Usually when making footnotes use the following rules:

• The same typeface is used as for the main text of the work (headset Times New Roman).
• The font size in footnotes is chosen 2-4 pt. less (if the text is written in 14 fonts, then footnotes are 10 or 12).
• Line spacing for footnotes is selected single, without paragraph indent.

Not regulated by the standard aspects of the design of each institution of higher education or even the department decides at its discretion, so it is better to study the guidelines or ask for clarification from the department staff responsible for the standard control.

The thesis shows everything that the student has learned in a higher educational institution, allows to realize the acquired knowledge and professional training. Incorrect design can cause non-admission to the protection of even a very good job.

The rules for the design of the thesis are determined by the universities, and they must be registered in the training manual. If in your university your own rules of writing a thesis are not published, you can write a dissertation, based on state standards. Here we analyze what the requirements are for the design of a dissertation in 2019.

Structure requirements

1. Title page.
2. List of performers.
3. Abstract.
4. Content.
5. Definitions
6. Notation and abbreviations.
7. Introduction
8. Main part.
9. Conclusion
10. List of sources used.
11. Applications.

The first, that is, the title page, is drawn up in the same way as in all written works. The list of performers for the thesis, as a rule, is limited to one student (although sometimes there are collective works) indicated on the title page.

Definition 1

The abstract is a summary of the content of the thesis without detailed interpretation and comments – only basic factual information and conclusions, including the volume of the report, the number of illustrations, tables, applications, the number of parts, the number of sources used.

The content is as follows:

1. Introduction
2. Chapters.
3. Paragraphs.
4. Items.
5. Sub items
6. Conclusion
7. List of sources used.

In front of each item of content should be an indication of the page.

In the introductory part, it is necessary to briefly and succinctly describe the object and subject of research, describe the goals and objectives, research methods, scientific and practical base. The volume of the introduction is 2-3 pages.

Next are chapters. They can be divided into three parts. In the first one, it is necessary to analyze and assess the problem at the moment, how topical it is, what problems have already been revealed, and which of them require further study. This is followed by the scientific research of the author, what goals he set for himself, what methods he used to achieve them. The last chapter is devoted to the results of the study. In conclusion, you should make a conclusion of your research.

References should consist of no less than forty sources; each of them should not be more than 5 years old, otherwise the information may be irrelevant. At the very end of the work there should be an application, that is, a collection of visual materials: graphs, charts, tables, illustrations. Each application is decorated on a separate sheet, and it must contain a link to the text.

Design of title page and table of contents of the thesis

Considering how to get a dissertation, we must dwell on the title page – it is the commission that sees it first. The requirements for the design of the thesis indicate that the title page should contain the following information:

• The name of the organization on the basis of which the work was done (institute, university, academy), as well as the name of the parent organization (in 2019 for most universities this is the Ministry of Science and Higher Education).
• Vultures approval and approval.
• Type of document (thesis, thesis project, final qualifying work). Type of document indicated in capital letters.
• The title of the thesis.
• Information about the performer (s) and the head (s) of the thesis, indicating academic degrees and academic titles.
• City and year in which the report was prepared.

Registration of the content (or table of contents) of the thesis should begin with the title of this section:

• Table of contents is usually written if parts of the work are logically interconnected (as is most often the case in a thesis work)
• The content is more typical for works consisting of unrelated parts, but in some universities it is required to use this word in the dissertation.

The content (table of contents) includes an introduction, the names of all sections and subsections, as well as items having their own name, conclusion, list of references and appendix names. Each element is followed by an indication of the page number from which it begins. A placeholder can be used between the section name and the page number, making it easier to read by line (dots or lines).

Registration of the text of the thesis

Standards for thesis design regulate the designation of titles in the dissertation and the design of the main text.

Headings of structural elements (such as “INTRODUCTION”, “CONCLUSION”, “LIST OF USED SOURCES”) are printed in capital letters, aligning the center of the line. There is no dot at the end, underscore is not used.

The main part of the work is divided into sections, subsections and paragraphs (if necessary – with subparagraphs). These parts are numbered in Arabic numerals, and the numbers of the nested elements contain the number of a higher level and the sequence number of the nested element.

Example 1

An example of a dissertation heading: 1 Theoretical aspects of inflation 1.1 History of inflation 1.1.1 Inflation in the XV-XVII centuries 1.1.2 Inflation in the XVIII-XIX centuries 1.2 Approaches to the definition of inflation

Headings should briefly and clearly reflect the information contained in a section or subsection. Items may not have headers. Headings should be typed with a capital letter, without putting a full stop. Headings are printed with indention indentation (they are not aligned to the width, like structural headings).

The main text of the work is prepared in print, printed on white A4 paper (if there are many larger tables and illustrations in the work, use of sheets A3 is allowed) on one side. The font should be black, normal (not bold), with a size of at least 12 pins (1.8 mm) – 14 pins are most often used.

Registration of final qualifying work provides that the sheets remain fields:

• Right – at least 10 mm.
• Top and bottom – at least 20 mm.
• Left – at least 30 mm (it is the largest, because the dissertation is sewn to the left).

Describing how a thesis is made out, there is a certain freedom: you can use different typeface fonts to emphasize attention (the main thing is that their size meets the requirements).

Formulas, illustrations and tables in the thesis

For ease of comparison and clarity in theses used tables. Basic requirements for the design of tables:

• Above the table on the left is placed its name (in one line with a number after a dash).
• The table should be mentioned in the text, and placed immediately after the first mention (if it does not fit, it is permissible to transfer to the next page).
• If the table is placed on two or more pages, the name is written before the first part of it, and on other pages they indicate: “Continuation of the table” and the number.
• The tables are numbered in Arabic numerals within the section or through numbering for the entire dissertation.
• Line headings and a graph start with a capital letter, and subtitles – with a capital letter, if they are independent, or lower case, if they continue the title.
• The font in the table may be less than in the main text.
• Tables are usually limited to lines. Inside the tables, you can delimit the line, but you cannot delimit, if the table is well read without them.

In the illustration, as well as in the table, you need to refer to the text, and place them after the first mention (on the same page or the next). Numbering for illustrations may be end-to-end or within a section. After the picture is placed its name, divided by the number of the dash: “Figure 1 – Graph of temperature changes.”

Formulation in the dissertation subject to the following requirements:

• Formulas stand out from the text on a separate line.
• Above and below the formulas are left on the free line.
• Under the formula you need to put an explanation of the symbols used and the coefficients in the order mentioned in the formula.
• Formulas are numbered end-to-end. The number is indicated in parentheses with right alignment.

Dissertation abstract is a brief description of the thesis. Translated from the Latin word “abstract” means “note”. Those. This is a small note on the dissertation, written in a concise form. It is written for members of the attestation commission so that they can quickly read it and understand what your dissertation is about. It may be in the form of a completed dissertation supplement, or it may be the first sheet of a handout to a dissertation. It seems to me that the second option is more convenient, since you will not have to wait until all the commission members take turns reading your abstract.

Abstract structure

It should be remembered that this is a brief description, so stretch the whole page or no longer follows. Your note should be written in 1-2 paragraphs, not more, and consist of 130-150 words. Teachers should very quickly, in 1-2 minutes familiarize themselves with the dissertation.

The abstract should reflect the characteristics of the thesis in terms of:

• Its meanings
• Content
• Forms and methods
• Problems

The composition of the abstract is approximately as follows:

• The name of the thesis and the name of the student
• The main provisions of the thesis (based on the goals and objectives)
• The hypothesis and problems of the dissertation
• Dissertation structure
• Enumeration of the number of pages, figures, graphs and the number of sources and pages in the graduation project.

Phrases that help in writing abstracts

Because Dissertation abstract should be as brief as possible, it is necessary to make the most concise sentences. The following phrases will help you with this:

• The dissertation is investigated …
• The dissertation is considered …
• The dissertation characterizes …
• Thesis is dedicated to …
• A great place in the dissertation is given …
• Described in detail …
• The thesis describes the theory …
• Etc.

Many students do not want to spend valuable time on small work, such as a dissertation presentation or abstract. And rightly so. For a small amount we can order these types of work for the minimum period. Moreover, you can choose the author yourself, based on the price and its rating.

Thesis is a very important stage in the life of each student. Therefore, the choice of topics should be approached responsibly, even if you decide to order all the work from us. Of course, you can finally decide on the topic, price and everything else with the selected author, but still it is better to rely on yourself on this issue. Our authors will execute any project that you order. And you still need to defend him before a strict commission. So it is better to take a topic that is interesting to you, and approve it at the department.

So, how to decide on a topic? You can follow the instructions at the very end of the article on the choice of the course topic. But still, a dissertation is a more serious thing, so the following recommendations are specific to her.

1. General knowledge

To write a thesis on an issue in which you do not understand anything is an impossible task. Try to write coursework on a similar topic for the entire period of study, and then the dissertation will only have to correct the topic. If you have not taken care of this in advance, then think that you are most interested in your specialty and choose from this area.

2. Relevance

The interests of the student are good, but the thesis should be relevant. In fact, the relevance of the work is determined by the degree of its knowledge. It is necessary to justify when writing an introduction to the dissertation. If there are any little developed aspects of the topic – it is a priori relevant. If you still doubt – contact your supervisor. He will tell you.

3. Scope of work

Remember that the dissertation is a voluminous work. It should be from 50 pages of printed text. Therefore, when choosing a topic, make sure that it is not too narrow, otherwise you can get into a situation where there will be nothing to write about. Then in your thesis work there will be an extra “water”, which will lead to a decrease in the quality of all the work.

4. Sources of information

When selecting a topic, it is important to remember that not all information is publicly available. Therefore, whatever topic is interesting for you, do not take it, if there are only a couple of sources in the library about it.

The act of implementation is one of the necessary documents accompanying any thesis, regardless of specialty and topic. In essence, this document confirms that the work is really relevant and can be applied in practice. Of course, not all departments require an example of the act of implementing the results of the thesis in a mandatory manner, but its presence is still worth taking care in advance, in case it is still useful.

Who issues the act?

As a rule, the issuance of the necessary documents is the responsibility of the organization on the basis of which you wrote your thesis. However, there are several options for obtaining help. So, if you wrote a thesis not based on any enterprise, then you can get a certificate from a company that can somehow use the results of your research in your work. Thus, acts or certificates can be provided by both state-owned enterprises or research institutes, and private companies. It all depends on your chosen topic and tasks, the solution of which you were engaged.

Content of the act

General example of the act on the implementation of the results of the thesis should contain the following data:

1. Author’s data and thesis topic
2. The full name of the company that issued the certificate, without abbreviations and abbreviations
3. Characteristics of the problem or a list of issues that are described in the work
4. Information on the fact and stage of implementation
5. Description of the results

It is important to remember that it is the information about the results that have been achieved that plays the greatest role, since it is these data that make it possible to judge how well and how deeply the work was done on the project. In addition, it is necessary to take into account that the act must contain precise quantitative data, and not general phrases. Of course, not every company will directly use the results of a young specialist in their work, but in this case, you can use a small loophole: ask for not an act of implementation, but a certificate of the use of thesis materials.

Plausibility check

On the one hand, no one will call the enterprise directorate, request reporting documentation and use other methods to verify the authenticity of the documents provided to you, because the certification commission already has enough work, but the supervisor does not need it. On the other hand, it is important to remember that in addition to information about the use of the results of your work, the act must contain the signature of the director of the company or his deputy, as well as a seal that you can not forge in any way, because forging signatures is a criminal offense. So an example of an act on the implementation of the thesis paper downloaded from the Internet will not work, since it does not contain the necessary signatures and seals.

Where to get the act?

Naturally, the first step is to contact the company, on the basis of which you wrote your thesis. If for any reason it is impossible to do so, try to find a private company whose business area is in any way in contact with the topic of your work. It often happens that the management can go to your meeting and issue the necessary paper with all signatures and stamps. However, if the situation is such that you received a refusal or the management does not know how to draw up an act, then you can always contact our company. We will provide not only an example of the act on the implementation of the results of the thesis, which will only sign and stamp, but we can help you with the search for a company that will give you the necessary information.

Upon graduation, the student should confirm that the skills and knowledge acquired by him are learned and can be used in practice. It is for this and write a thesis. Of course, every year students are offered the broadest choice of various topics, and for students of economic specialties the analysis of the financial condition of the company is most popular. The graduation work of 2014 on this topic in its structure and design principles is not much different from the work of previous years. However, many students have some difficulties.

Work structure

To begin with, it is worth noting that the topic “Analysis of the financial condition of the company” of the thesis should be carried out in the form of research. In other words, the student will understand the work of a particular company or company. However, one cannot do without a general description of the analysis of the economic condition. Based on this, the approximate structure of the thesis will look like this:

1. Introduction, which describes the goals and objectives of the study, the relevance of the described problem, as well as a brief description of the chapters of the thesis.
2. The first part is considered more theoretical. Here you need to demonstrate your knowledge of the meaning and essence of the analysis of the financial condition of the company, the types of financial analysis and the like.
3. The second part is practical, since in it the above knowledge is used directly during the consideration of the work of a particular enterprise.
4. Conclusion in which you need to present your own conclusions, as well as propose and justify a strategy to improve and optimize the economic condition of the company.
5. References, which contains not only the sources to which the student turned while writing a thesis, but also various legal acts regulating the activities of the company.
6. The application in which all sorts of graphs, charts and tables. For example, the schedule of profitability, business diagram, a table with the structure of assets and so on.

Where to get information?

It is quite logical that not every company will easily admit a student to the documents that are necessary for writing a thesis. Another difficulty lies in the fact that many universities require the signature of the head of the company, as well as a “wet” seal on all accompanying documents. Naturally, you can always search for familiar, but there is another way out of the situation. For example, you can find the necessary information on the Internet, and then ask the management or the secretary to put signatures and stamps. As practice shows, if the company has nothing to hide, and the information is publicly available, they will not refuse you. Moreover, if you later need a document such as the “Act on the implementation of the results of the thesis,” you can get it in the same company.

Where to look for help?

Naturally, the first and main assistant should be your curator. However, it often happens that the curator is not too responsible about their work, and you remain in a hopeless situation. Let’s just say: in no way should you download finished work from the network. Believe me, it’s literally five minutes to track down such a job, and as a result you may simply not be allowed to protect. Agree, it is not worth it. If the situation is such that “analysis of the financial condition of the company” – the thesis on this topic was too complicated for you, then the best way out of the situation would be to resort to the help of our specialists. Authors working in our company can write a thesis on any topic, and our company will take care that all accompanying papers are in perfect order.

For the first time doing a thesis, you may encounter difficulties understanding how to write one or another section of it. This can happen with an understanding of what research methods are and how they should be used and then described in their work. In this case, you will certainly be helped by an example of research methods in a thesis work.

Where can I find an example of research in the thesis

1. In the scientific and methodical literature.
2. On the website of the university.
3. On other Internet sites.
4. In the drafts of graduates of your university past issues.

Before you start work, get professional and high-quality advice from your supervisor (a teacher responsible for how you do your job). If you have any questions, contact him for complete information. In this case, you will be easier to navigate in the process of writing a thesis and quickly correct the mistakes made.

What are research methods and why are they necessary when writing scientific papers?

Before asking for help from different sources of information, study what the research methods are, how they are, and why they are needed when writing a thesis.

In order to write a professional-competent thesis, you need to consistently perform a number of necessary actions, as a result of which you can make a generalized, preliminary, and then the final conclusions. These include research methods. When studying something (phenomena, subject, topic, etc.) we use various methods (techniques, techniques) that help us understand their essence. These are the research methods. They can be divided into two groups:

• practical (or in other words empirical research methods);
• general theoretical.

Comparative analysis of two or more objects of the same type, phenomena, judgments, conducting visual experiments are vivid examples of practical research methods. The general theoretical methods include:

• modeling (creating similar situations, creating models for individual characteristics of the object under study);
• abstraction (conscious distraction of attention from the known properties of the object to detect unknowns until now);
• induction method – deduction (from simple to complex and vice versa);
• method of axioms and formulas;
• analysis (decomposition of more complex into simple components);
• synthesis (combining individual elements into a common one), etc.

Research methods must be included in the introductory part of the thesis, thanks to which your project curator, and then the members of the State Attestation Commission, will be able to conclude that the studies you have done are correct, and understand how you came to this or that conclusion. And with their help you can prove the correctness of the conclusions made in the thesis. Therefore, it is very important to correctly determine what type of research these or other methods are used by you. Here you can use the example of research methods in a thesis. It is very important to understand that you should not specify too many methods, and even more so methods that you did not use yourself in your research. This may lead you at the most crucial moment – when defending a thesis, since you may be asked to elaborate on one method or another described in more detail, to which you are unlikely to respond. And one more tip – describe the research methods used after writing the main part and the conclusion. In this case, you can accurately formulate and describe them. If you still have problems with writing this or that part of the thesis, contact our specialists. They will quickly and efficiently help you.